Search

Start Over Community Spherical Torus

41. Modelling of Ablatant Deposition from Electromagnetically Driven Radiative Pellets for Disruption Mitigation Studies

Author(s):
Lunsford, Robert; Raman, Roger; Brooks, Arthur; Ellis, Robert A.; Lay, W-S;
Abstract:
The Electromagnetic Particle Injector (EPI) concept is advanced through the simulation of ablatant deposition into ITER H-mode discharges with calculations showing penetration past the H-mode pedestal for a range of injection velocities and granule sizes concurrent with the requirements of disruption mitigation. As discharge stored energy increases in future fusion devices such as ITER, control and handling of disruption events becomes a critical issue. An unmitigated disruption could lead to failure of the plasma facing components resulting in financially and politically costly repairs. Methods to facilitate the quench of an unstable high current discharge are required. With the onset warning time for some ITER disruption events estimated to be less than 10 ms, a disruption mitigation system needs to be considered which operates at injection speeds greater than gaseous sound speeds. Such an actuator could then serve as a means to augment presently planned pneumatic injection systems. The EPI uses a rail gun concept whereby a radiative payload is delivered into the discharge by means of the JxB forces generated by an external current pulse, allowing for injection velocities in excess of 1 km/s. The present status of the EPI project is outlined, including the addition of boost magnetic coils. These coils augment the self-generated rail gun magnetic field and thus provide a more efficient acceleration of the payload. The coils and the holder designed to constrain them have been modelled with the ANSYS code to ensure structural integrity through the range of operational coil cu
Type:
Dataset
Issue Date:
June 2019

42. Design and simulation of the snowflake divertor control for NSTX-U

Author(s):
Vail, P. J.; Boyer, M. D.; Welander, A. S.; Kolemen, E.; U.S. Department of Energy contract number DE-AC02-09CH11466
Abstract:
This paper presents the development of a physics-based multiple-input-multiple-output algorithm for real-time feedback control of snowflake divertor (SFD) configurations on the National Spherical Torus eXperiment Upgrade (NSTX-U). A model of the SFD configuration response to applied voltages on the divertor control coils is first derived and then used, in conjunction with multivariable control synthesis techniques, to design an optimal state feedback controller for the configuration. To demonstrate the capabilities of the controller, a nonlinear simulator for axisymmetric shape control was developed for NSTX-U which simultaneously evolves the currents in poloidal field coils based upon a set of feedback-computed voltage commands, calculates the induced currents in passive conducting structures, and updates the plasma equilibrium by solving the free-boundary Grad-Shafranov problem. Closed-loop simulations demonstrate that the algorithm enables controlled operations in a variety of SFD configurations and provides capabilities for accurate tracking of time-dependent target trajectories for the divertor geometry. In particular, simulation results suggest that a time-varying controller which can properly account for the evolving SFD dynamical response is not only desirable but necessary for achieving acceptable control performance. The algorithm presented in this paper has been implemented in the NSTX-U Plasma Control System in preparation for future control and divertor physics experiments.
Type:
Dataset
Issue Date:
April 2019

43. Elemental and topographical imaging of microscopic variations in deposition on NSTX-U and DIII-D samples2

Author(s):
C.H. Skinner, C.P. Chrobak, R. Kaita, B.E.Koel
Abstract:
Abstract: Tokamak plasma facing components have surface roughness that can cause microscopic spatial variations in erosion and deposition and hence influence material migration, erosion lifetime, dust and tritium accumulation, and plasma contamination. However high spatial resolution measurements of deposition on the scale of the surface roughness have been lacking to date. We will present elemental images of graphite samples from NSTX-U and DIII-D DiMES experiments performed with a Scanning Auger Microprobe at sub-micron resolution that show strong microscopic variations in deposition and correlate this with 3D topographical maps of surface irregularities. The NSTX-U samples were boronized and exposed to deuterium plasmas and the DiMES samples had localized Al and W films and were exposed to dedicated helium plasmas. Topographical maps of the samples were performed with a 3D confocal optical microscope and compared to the elemental deposition pattern. The results revealed localized deposition concentrated in areas shadowed from the ion flux, incident in a direction calculated (for the DiMES case) by taking account of the magnetic pre-sheath.
Type:
Dataset
Issue Date:
April 2019

44. TRANSP-based Optimization Towards Tokamak Scenario Development

Author(s):
W.P. Wehner, E. Schuster, M.D. Boyer, F. Poli
Abstract:
An optimization approach that incorporates the predictive transport code TRANSP is proposed for tokamak scenario development. Optimization methods are often employed to develop open-loop control strategies to aid access to high performance tokamak scenarios. In general, the optimization approaches use control-oriented models, i.e. models that are reduced in complexity and prediction accuracy as compared to physics-oriented transport codes such as TRANSP. In the presented approach, an optimization procedure using the TRANSP code to simulate the tokamak plasma is considered for improved predictive capabilities. As a test case, the neutral beam injection (NBI) power is optimized to develop a control strategy that maximizes the non-inductive current fraction during the ramp-up phase for NSTX-U. Simulation studies towards the achievement of non-inductive ramp up in NSTX-U have already been carried out with the TRANSP code. The optimization-based approach proposed in this work is used to maximize the non-inductive current fraction during ramp-up in NSTX-U, demonstrating that the scenario development task can be automated. An additional test case considers optimization of the current ramp rate in DIII-D for obtaining a stationary plasma characterized by a flat loop voltage profile in the flattop phase.
Type:
Dataset
Issue Date:
April 2019

45. A scalable real-time framework for Thomson scattering analysis: Application to NSTX-U

Author(s):
F. M. Laggner, A. Diallo, B. P. LeBlanc, R. Rozenblat, G. Tchilinguirian, E.Kolemen, the NSTX-U team
Abstract:
A detailed description of a prototype setup for real-time (rt) Thomson scattering (TS) analysis is presented and implemented in the multi-point Thomson scattering (MPTS) diagnostic system at the National Spherical Torus Experiment Upgrade(NSTX-U). The data acquisition hardware was upgraded with rt capable electronics (rt-analog digital converters (ADCs) and a rt server) that allow for fast digitization of the laser pulse signal of eight radial MPTS channels. In addition, a new TS spectrum analysis software for a rapid calculation of electron temperature (Te) and electron density (ne) was developed. Testing of the rt hardware and data analysis soft-ware was successfully completed and benchmarked against the standard, post-shot evaluation. Timing tests were performed showing that the end-to-end processing time was reproducibly below 17 ms for the duration of at least 5 s, meeting a 60 Hz deadline by the laser pulse repetition rate over the length of a NSTX-U discharge. The presented rt framework is designed to be scalable in system size, i.e. incorporation of additional radial channels by solely adding additional rt capable hardware. Furthermore, it is scalable in its operation duration and was continuously run for up to 30 min, making it an attractive solution for machines with long discharge duration such as advanced, non-inductive tokamaks or stellarators.
Type:
Dataset
Issue Date:
March 2019

46. Global modeling of wall material migration following boronization in NSTX-U

Author(s):
Nichols, J.H.; Jaworski, M.A.; Skinner, C.H.; Bedoya, F.; Scotti, F.; Soukhanovskii, V.A.; Schmid, K.
Abstract:
Boronization is commonly utilized in tokamaks to suppress intrinsic impurities, most notably oxygen from residual water vapor. However, this is a temporary solution, as oxygen levels typically return to pre-boronization levels following repeated plasma exposure. The global impurity migration model WallDYN has been applied to the post-boronization surface impurity evolution in NSTX-U. A “Thin Film Model” has been incorporated into WallDYN to handle spatially inhomogeneous conditioning films of varying thicknesses, together with an empirical boron conditioning model for the NSTX-U glow discharge boronization process. The model qualitatively reproduces the spatial distribution of boron in the NSTX-U vessel, the spatially-resolved divertor emission pattern, and the increase in oxygen levels following boronization. The simulations suggest that oxygen is primarily sourced from wall locations without heavy plasma flux or significant boron deposition, namely the lower and upper passive plates and the lower private flux zone.
Type:
Dataset
Issue Date:
March 2019

47. Initial transport and turbulence analysis and gyrokinetic simulation validation in NSTX-U L-mode plasmas

Author(s):
Guttenfelder, W.; Kaye, S.M.; Kreite, D.M.; Bell, R.E.; Diallo, A.; LeBlanc, B.P.; McKee, G.R.; Podesta, M.; Sabbagh, S.A.; Smith, D.R.
Abstract:
Transport analysis, ion-scale turbulence measurements, and initial linear and nonlinear gyrokinetic simulations are reported for a transport validation study based on low aspect ratio NSTX-U L-mode discharges. The relatively long, stationary L-modes enabled by the upgraded centerstack provide a more ideal target for transport validation studies that were not available during NSTX operation. Transport analysis shows that anomalous electron transport dominates energy loss while ion thermal transport is well described by neoclassical theory. Linear gyrokinetic GYRO analysis predicts that ion temperature gradient (ITG) modes are unstable around normalized radii $\rho$=0.6-0.8, although $E\timesB$ shearing rates are larger than the linear growth rates over much of that region. Deeper in the core ($\rho$=0.4-0.6), electromagnetic microtearing modes (MTM) are unstable as a consequence of the relatively high beta and collisionality in these particular discharges. Consistent with the linear analysis, local, nonlinear ion-scale GYRO simulations predict strong ITG transport at $\rho$=0.76, whereas electromagnetic MTM transport is important at $\rho$=0.47. The prediction of ion-scale turbulence is consistent with 2D beam emission spectroscopy (BES) that measures the presence of broadband ion-scale fluctuations. Interestingly, the BES measurements also indicate the presence of bi-modal poloidal phase velocity propagation that could be indicative of two different turbulence types. However, in the region between ($\rho$=0.56, 0.66), ion-scale simulations are strongly suppressed by the locally large $E\timesB$ shear. Instead, electron temperature gradient (ETG) turbulence simulations predict substantial transport, illustrating electron-scale contributions can be important in low aspect ratio L-modes, similar to recent analysis at conventional aspect ratio. However, agreement within experimental uncertainties has not been demonstrated, which requires additional simulations to test parametric sensitivities. The potential need to include profile-variation effects (due to the relatively large value of $\rho_*$=$\rho_i$/a at low aspect ratio), including electromagnetic and possibly multi-scale effects, is also discussed.
Type:
Dataset
Issue Date:
March 2019

48. Study of liquid metal surface wave damping in the presence of magnetic fields and electrical currents

Author(s):
Fisher, A.E.; Hvasta, M.G.; Kolemen, E.
Abstract:
Experiments and predictions of surface wave damping in liquid metal due to a surface aligned magnetic field and externally regulated j × B force are presented. Fast-flowing, liquid-metal plasma facing components (LM-PFCs) are a proposed alternative to solid PFCs that are unable to handle the high heat flux, thermal stresses, and radiation damage in a tokamak. The significant technical challenges associated with LM-PFCs compared to solid PFCs are justified by greater heat flux management, self-healing properties, and reduced particle recycling. However, undesirable engineering challenges such as evaporation and splashing of the liquid metal introduce excessive impurities into the plasma and degrade plasma performance. Evaporation may be avoided through high-speed flow that limits temperature rise of the liquid metal by reducing heat flux exposure time, but as flow speed increases the surface may become more turbulent and prone to splashing and uneven surfaces. Wave damping is one mechanism that reduces surface disturbance and thus the chances of liquid metal impurity introduction into the plasma. Experiments on the Liquid Metal eXperiment Upgrade (LMX-U) examined damping under the influence of transverse magnetic fields and vertically directed Lorentz force.
Type:
Dataset
Issue Date:
March 2019

49. TRANSP-based closed-loop simulations of current profile optimal regulation in NSTX-Upgrade

Author(s):
Ilhan, Z.O.; Boyer. M.D.; Schuster, E.
Abstract:
Active control of the toroidal current density profile is critical for the upgraded National Spherical Torus eXperiment device (NSTX-U) to maintain operation at the desired high-performance, MHD-stable, plasma regime. Initial efforts towards current density profile control have led to the development of a control-oriented, physics-based, plasma-response model, which combines the magnetic diffusion equation with empirical correlations for the kinetic profiles and the non-inductive current sources. The developed control-oriented model has been successfully tailored to the NSTX-U geometry and actuators. Moreover, a series of efforts have been made towards the design of model-based controllers, including a linear-quadratic-integral optimal control strategy that can regulate the current density profile around a prescribed target profile while rejecting disturbances. In this work, the tracking performance of the proposed current-profile optimal controller is tested in numerical simulations based on the physics-oriented code TRANSP. These high-fidelity closed-loop simulations, which are a critical step before experimental implementation and testing, are enabled by a flexible framework recently developed to perform feedback control design and simulation in TRANSP.
Type:
Dataset
Issue Date:
March 2019

50. Application of transient CHI plasma startup to future ST and AT devices

Author(s):
Hammond, K.C.; Raman, R.; Jardin, S.C.
Abstract:
Employment of non-inductive plasma start-up techniques would considerably simplify the design of a spherical tokamak fusion reactor. Transient coaxial helicity injection (CHI) is a promising method, expected to scale favorably to next-step reactors. However, the implications of reactor-relevant parameters on the initial breakdown phase for CHI have not yet been considered. Here, we evaluate CHI breakdown in reactor-like configurations using an extension of the Townsend avalanche theory. We find that a CHI electrode concept in which the outer vessel wall is biased to achieve breakdown, while previously successful on NSTX and HIT-II, may exhibit a severe weakness when scaled up to a reactor. On the other hand, concepts which employ localized biasing electrodes such as those used in QUEST would avoid this issue. Assuming that breakdown can be successfully attained, we then apply scaling relationships to predict plasma parameters attainable in the transient CHI discharge. Assuming the use of 1 Wb of injector flux, we find that plasma currents of 1 MA should be achievable. Furthermore, these plasmas are expected to Ohmically self-heat with more than 1 MW of power as they decay, facilitating efficient hand-off to steady-state heating sources. These optimistic scalings are supported by TSC simulations.
Type:
Dataset
Issue Date:
February 2019

Limit your search

View distribution

Current results range from 2015 to 2023

View larger »