Search

Start Over Subcommunity ITER and Tokamaks

1. Initial Results from Boron Powder Injection Experiments in WEST Lower Single Null L-mode Plasmas

Author(s):
Bodner, Grant; Gallo, Alberto; Diallo, Ahmed; Lunsford, Robert; Moreau, Philippe; Nagy, Alex; Pellissier, Francis-Pierre; Guillemaut, Christophe; Gunn, James; Bourdelle, Clarisse; Desgranges, Corinne; Manas, Pierre; Bortolon, Alessandro; Klepper, Christopher; Tsitrone, Emanuelle; Unterberg, Ezekial; Vermare, Laure
Abstract:
Using a recently installed impurity powder dropper (IPD), boron powder (< 150 μm) was injected into lower single null (LSN) L-mode discharges in WEST. IPDs possibly enable real-time wall conditioning of the plasma-facing components and may help to facilitate H-mode access in the full-tungsten environment of WEST. The discharges in this experiment featured Ip = 0.5 MA, BT = 3.7 T, q95 = 4.3, tpulse = 12–30 s, ne,0 ~ 4×1019 m-2, and PLHCD ~ 4.5 MW. Estimates of the deuterium and impurity particle fluxes, derived from a combination of visible spectroscopy measurements and their corresponding S/XB coefficients, showed decreases of ~ 50% in O+, N+, and C+ populations during powder injection and a moderate reduction of these low-Z impurities (~ 50%) and W (~ 10%) in the discharges that followed powder injection. Along with the improved wall conditions, WEST discharges with B powder injection observed improved confinement, as the stored energy WMHD, neutron rate, and electron temperature Te increased significantly (10–25% for WMHD and 60–200% for the neutron rate) at constant input power. These increases in confinement scale up with the powder drop rate and are likely due to the suppression of ion temperature gradient (ITG) turbulence from changes in Zeff and/or modifications to the electron density profile.
Type:
Dataset
Issue Date:
2022

2. Supplemental material for: Verification, validation, and results of an approximate model for the stress of a Tokamak toroidal field coil at the inboard midplane

Author(s):
Swanson, CPS; Kahn, S; Rana, C; Titus, PH; Brooks, AW; Guttenfelder, W; Zhai, Y; Brown, TG; Menard, JE
Abstract:
This is the supplemental material for the manuscript "Verification, validation, and results of an approximate model for the stress of a Tokamak toroidal field coil at the inboard midplane" submitted to Fusion Engineering and Design. This material includes PDF writeups of the derivations of the axisymmetric extended plane strain model, the elastic properties smearing model, and 20+ MATLAB scripts and functions which implement the model and generate the figures in the paper.
Type:
collection, Dataset, and Software
Issue Date:
2022

3. Wall conditioning and ELM mitigation with boron nitride powder injection in KSTAR

Author(s):
Gilson, Erik; Lee, H; Bortolon, A; Choe, W; Diallo, A; Hong, SH; Lee, HM; Maingi, R; Mansfield, DK; Nagy, A; Park, SH; Song, IW; Song, JI; Yun, SW; Nazikian, R
Abstract:
Results from KSTAR powder injection experiments, in which tens of milligrams of boron nitride (BN) were dropped into low-power H-mode plasmas, show an improvement in wall conditions in subsequent discharges and, in some cases, a reduction or elimination of edge-localized modes (ELMs). Injected powder is distributed by the plasma flow and is deposited on the wall and, over the course of several discharges, was observed to gradually reduce recycling by 33%, and decrease both the ELM amplitude and frequency. This is the first demonstration of the use of BN for ELM mitigation. In all of these experiments, an Impurity Powder Dropper (IPD) was used to introduce precise, controllable amounts of the materials into ELMy H-mode KSTAR discharges. The plasma duration was between 10 s and 15 s, 𝐼𝑝 = 500 kA, 𝐵𝑇 = 1.8 T, 𝑃NBI = 1.6 MW, and 𝑃ECH = 0.6 MW. Plasma densities were between 2 and 3 × 1019 m−3. In all cases, the pre-fill and startup gas-fueling was kept constant, suggesting that the decrease in baseline D𝛼 emission is in fact due to a reduction in recycling. The results presented herein highlight the viability of powder injection for intra-shot and between-shot wall conditioning.
Type:
Dataset
Issue Date:
September 2021

4. Enhancement of edge turbulence concomitant with ELM suppression during boron powder injection in EAST

Author(s):
Sun, Zhen; Maingi, Rajesh; Diallo, Ahmed; Xu, Wei; Qian, Yuzhong; Tritz, Kevin; Ye, Yang; Li, Chenglong; Xu, Zhong; Wang, Yifeng; Kaixuan, Ye; Bortolon, A.; Nagy, Alex; Zhang, Ling; Duan, Yanmin; Lu, Zhiyuan; Wang, Huiqian; Shi, Tonghui; Zhao, Hailin; Gao, Wei; Xu, Jichan; Chen, Ran; Huang, Ming; Zuo, Guizhong; Xu, Guosheng; Gong, Xianzu; Hu, Jiansheng
Abstract:
Data supporting the manuscript "Enhancement of edge turbulence concomitant with ELM suppression during boron powder injection in EAST" published in Plasma of Physics, 2021.
Type:
Dataset and Image
Issue Date:
August 2021

5. Observation of synergy between lower hybrid waves at two frequencies in EAST

Author(s):
Choi, W.; Poli, F. M.; Li, M. H.; Baek, S. G.; Gorenlenkova, M.; Ding, B. J.; Gong, X. Z.; Chan, A.; Duan, Y. M.; Hu, J. H.; Lian, H.; Lin, S. Y.; Liu, H. Q.; Qian, J. P.; Wallace, G.; Wang, Y. M.; Zang, Q.; Zhao, H. L.
Abstract:
Synergistic effects between two frequencies of lower hybrid (LH) waves—operating at 2.45 and 4.6 GHz—were observed in experiment on EAST for the first time. At low density (n_e,lin ≈ 2.0 × 10^19m^−3), simultaneous injection of a 65/35 mix of 2.45 GHz/4.6 GHz power achieved an LHCD efficiency that was 25% higher than what should be expected from the linear combination of the two sources. The experiment was interpreted with time-dependent simulations, using the equilibrium and transport solver TRANSP, coupled with the ray-tracing code GENRAY and the Fokker-Planck solver CQL3D. For each discharge, profiles of current and hard x-ray from simulation and measurement agree within uncertainties. An examination of the electron distribution function indicates that the LH synergy is supported by the increased width of the LH resonance plateau in the simultaneous injection case compared to independent injection.
Type:
Dataset
Issue Date:
June 2021

6. Type-I ELM mitigation by continuous lithium granule gravitational injection into the upper tungsten divertor in EAST

Author(s):
Sun, Zhen; Yuzhong, Qian; Maingi, Rajesh; Wang, Yifeng; Wang, Yumin; Nagy, Alex; Tritz, Kevin; Lunsford, Robert; Gilson, Erik; Zuo, Guizhong; Xu, Wei; Huang, Ming; Meng, Xiancai; Mansfield, Dennis K.; Zang, Qing; Zhu, Xiang; Lin, Xin; Liu, Haiqing; Duan, Yanmin; Zhang, Ling; Lyu, Bo; Liu, Yong; Wang, Liang; Bortolon, Ale; Xu, Guosheng; Gong, Xianzu; Hu, Jiansheng
Abstract:
Large edge-localized modes (ELMs) were mitigated by gravitational injection of lithium granules into the upper X-point region of the EAST device with tungsten plasma-facing components. The maximum ELM size was reduced by ~ 70% in high βN H-mode plasmas. Large ELM stabilization was sustained for up to about 40 energy confinement times, with constant core radiated power and no evidence of high-Z or low-Z impurity accumulation. The lithium granules injection reduced the edge plasma pedestal density and temperature and their gradients, due to increased edge radiation and reduced recycling from the plasma-facing components. Ideal stability calculations using the ELITE code indicate that the stabilization of large ELMs correlates with improved stability of intermediate-n peeling-ballooning modes, due to reduced edge current resulting from the profile changes. The pedestal pressure reduction was partially offset by a core density increase, which resulted in a modest ~ 7% drop in core stored energy and normalized energy confinement time. We surmise that the remnant small ELMs are triggered by the penetration of multiple Li granules just past the separatrix, similar to small ELMs triggered by deuterium pellet [S. Futatani et al., Nucl. Fusion 54 (2014) 073008]. This study extends previous ELM elimination with Li powder injection [R. Maingi et al., Nucl. Fusion 58 (2018) 024003] in EAST because 1) use of small, dust-like powder and the related potential health hazards were eliminated, and 2) use of macroscopic granules should be more applicable to future devices, due to deeper penetration than dust particles, e.g. inside the separatrix with velocities ~ 10 m/s in EAST.
Type:
Article
Issue Date:
April 2021

Limit your search

View distribution

Current results range from 2021 to 2022

View larger »